Cooling Tower Components

Product Details:

We offer a wide range of cooling tower gearbox and drive shaft, which is designed as per the AGMA standards and CTI Bulletin STD-111. These are available in various features like the right angle, double-reduction, spiral-bevel gear reducers. The fill, drain and vent lines are fabricated using GI / stainless steel.

Following are the features of our gearbox:

• The speed reducers are sized with a minimum service factor (S.F.) of 2.0, which is based on the motor nameplate horsepower
• The bearings are lubricated by a positive splash system
• The fill, drain and vent lines will extend outside of the fan stacks and have a sight glass
• The sight glasses are marked to show normal lubricant level in the reducer

The drive shaft is well connected by flexible and self-aligning couplings to the motor and gear reducer. Some of the features of it are:

• Each drive shall include an HDG / SS single piece drive shaft
• Each drive shaft and coupling set is sized for a minimum service factor of 2.0
• The drive shaft is based on the motor nameplate rating, which is as per CTI standard
• The coupling hubs are keyed to the shafts in such a way that shaft assembly is dynamically balanced
• Appropriate drive shaft arrester and coupling guards are supplied as per OSHA requirements to protect equipment and operating personnel.

Product Details:

We are one of the leading manufacturers of Cooling Tower Motors and provide the best quality of Cooling tower motors to our valuable Clients.

Product Details:

We are offering Electric Fan Motors to our client.With our expertise and trustworthiness, we are engaged to deliver an optimum quality range ofElectric Fan Motors for towers.
Features:

• Suitable for Hoist, lifting & crane application
• Suitable for various Duty cycle operations
• High performance better output

Get the best price of Three Phase Cooling Tower Motor.

Additional Information:

• Pay Mode Terms: Advance

Product Details:

Empowered by complete market research and a team of adept professionals, we have got appreciation for serving qualitativePVC Fill for Cooling Tower. In order to deliver defect free range at customers' end, these products are thoroughly checked on well defined parameters during the production. The offered PVC fills are manufactured using supreme quality PVC material under the stiff surveillance of Anew Tower Tech's experts. Further, the offered PVR fills are made available to our valued clients at the market leading prices.

Product Details:

We are offering Cooling Tower Drive Shafts. Each drive shall include an HDG / SS, single piece drive shaft connected by flexible, self-aligning couplings to the motor and to the gear reducer. Each drive shaft and coupling set is sized for a minimum service factor of 2.0 based on the motor nameplate rating as per CTI standard. The coupling hubs will be keyed to the shafts, and the shaft assembly is dynamically balanced. Appropriate drive shaft arrestors and coupling guards are supplied as per industrial requirements to protect equipment and operating personnel.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We offer our PVC Drift Eliminators, which are widely used for eliminating corrosion of certain vital components. These eliminators are fabricated using polyvinyl chloride (PVC) plastic material. Eliminators are assembled in sections, which easily removes contaminated solvents. It also inspects and maintains the water distribution system and the top fill area.

The undesirable loss of liquid water to the environment is known as ‘drift’. It happens through small droplets that entrained by leaving air stream. Chemicals and minerals are highly contaminated with these water droplets which mainly impacts the nearest environment.

A New Tech uses both profile and cellular type eliminator which ensures the complete removal of water droplets from the air stream, which limits the drift rate so that it allows 0.005% of circulating water flow rate. Through low drift rate, our cooling towers save valuable water and water treatment chemicals.

The drift eliminators are constructed of polyvinyl chloride (PVC) plastic material which effectively eliminates corrosion of these vital components. They are assembled in sections to facilitate easy removal for inspection and maintenance of the water distribution system and top of the fill area.

Product Details:

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range ofSS Grid to our client.

Product Details:

We are offering Cooling Tower Gearbox to our client. we have a team of experienced professionals who deliver the best cooling tower gearbox with durability.

Additional Information:

• Pay Mode Terms: Advance

Product Details:

We are offering Cooling Tower Nozzles to our client and We are one of the brand which is dedicated towards fulfilling the requirements of our clients in Cooling Tower Nozzels. From past 8 years we have achieved a milestone in this Industry.

Product Details:

We are offering Cooling Tower Eliminator. "Drift" is the undesirable loss of liquid water to the environment via small droplets that become entrained in the leaving air stream. These water droplets carry with them chemicals and minerals thus impacting the surrounding environment.

Additional Information:

• Pay Mode Terms: Advance

Product Details:

We are offering Drift Eliminator Cooling Tower to our client as per their requirements.

Product Details:

We specialize in providing our clients with a wide range of FRP Fan Stack, which is available in diverse sizes and shapes. These high precision products are available in ribbed construction and aerodynamic inlet bellmouth, which helps in reducing frictional losses and velocity pressure. To maintain mechanical items, these are provided with inspection door.